mlesd12a-0402 multilayer polymer ? esd protection for high speed data lines to inches mm dim min max min max note a . 037 . 045 0.95 1.15 b .0 17 .0 2 6 0.45 0.65 c .0 13 .0 17 0.33 0.43
omp onents 20736 marilla street chatsworth
m c c iec61000-4-2 esd contact discharge 8kv , max 15kv iec61000-4-2 esd air discharge 15kv , max 25kv ? multilayer structure ? surface mount ? extremely low capacitance ? very low leakage current ? fast response time ? bi-directional esd protection ? lead free solder termination ? the best esd protection for high frequency, low voltage appl ications features application ? high definition multi-media interface (hdmi) ? digital visual interface (dvi) ? display port interface ? unified display interface (udi) ? mddi ports ? gigabit ethernet ? usb2.0 and ieee1394 interface * caution: this component is designed for signal li ne protection only, not intended to be used under bias, not for application with a power l ine. dimensions d .0 10 .0 14 0.25 0.35 e .0 24 .0 28 0.60 0.70 f .0 1 7 .022 0.45 0.55 g .0 33 .0 37 0.85 0.95 environmental specifications ? operation temperature: -40~90 ? moisture resistance, steady state: mil-std-833,method 10 04.7, 85% rh,85 ,1000hrs ? thermal shock: mil-std-202,method 107g,- 55 to150 ,30 min cycle,10 cycles. ? vibration: mil-std-202f, method 201a, (10 to 55 to 10hz, 1 mi n. cycle, 2hrs each in x-y-z) ? chemical resistance: astm d-543, 4hrs @40 , 3 solutions(h 2 o, detergent solution, deluxer ) ? solder leach resistance and terminal adhesion: per eia-576 test www. mccsemi .com 1 of 4 revision: 1 200 9 /01/01 esd suppressor tm micro commercial components suggested solder pad layout 0402 e f g
m c c tm micro commercial components typical mlesd clamping for +8kv pulse per iec61000-4-2 www. mccsemi .com 2 of 4 revision: 1 200 9 /01/01 mlesd12a-0402 electrical characteristics electrical characteristics parameter symbol conditions min typ max units continuous operating voltage v dc --- --- --- 12 v trigger voltage v t iec61000-4-2 8kv contact discharge --- 300 --- v clamping voltage v c iec61000-4-2 8kv contact discharge --- 20 --- v leakage current i l 12v v dc --- 0.10 10 na capacitance c p vr = 0v, f = 1mhz --- 0.15 0.3 pf operating temperature --- --- -40 --- 90 storage temperature --- --- -55 --- 150 esd pulse withstand pulses iec61000-4-2 8kv contact discharge 2000 --- --- --- notes: 1, trigger and clamping voltage measure per iec 6100 0-4-2, 8kv contact discharge method
m c c tm micro commercial components design recommendations for usb2.0 for usb2.0 port mlesd12a-0402 design recommendations for antenna for antenna line mlesd12a-0402 www. mccsemi .com 3 of 4 revision: 1 200 9 /01/01 mlesd12a-0402
m c c tm micro commercial components products are represented on our website, harmless against all damages. ***applications disclaimer*** ***important notice*** aerospace or military applications. products offer by micro commercial components corp . are not intended for use in medical, micro commercial components corp . reserve s the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . micro commercial components corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . the user of products in such applications shall assume all risks of such use and will agree to hold micro commercial components corp . and all the companies whose ordering information device packing (part number)-tp tape&reel;10kpcs/reel 3 www. mccsemi .com 4 of 4 revision: 1 200 9 /01/01
|
